ActionTec 11Mbps Wireless Access Point Manual de usuario descargar pdf (Pagina 9)

Installing the Actiontec Wireless Access Point

The Actiontec Wireless Access Point can be installed in 2 different ways:

On a desktop.

Determine a clear area on your desktop where the Actiontec Wireless Access

Point can be placed in an upright position clear of obstructions.

Mounted on a wall.

Prior to drilling holes into a wall, make sure the wall area of interest is clear of

electrical wiring or water pipes.

Determine the position of the screws and mark with a pencil.

Drill holes in the wall at the location of the marks.

Insert plastic lugs into the holes

Fasten the screws into the plastic lugs, making sure to leave a 3mm distance

as clearance between the wall and screw heads.

Mount the Actiontec Wireless Access Point onto the screws.

Figure 5: Actiontec Wireless Access Point on a desktop

Figure 6: Actiontec Wireless Access Point on a wall

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Sin comentarios

ActionTec 11Mbps Wireless Access Point Manual de usuario Pagina 9